HMI

HMI-Certified Program

• Overview
• Certified Products
• Apply for HMI-Certified

• Industry Groups
• HMI
• Certified Program

SECTION 5 – Technical File Guide

5.1 The technical file for each product or product family of like design that is HMI Certified shall include the following items:

• 5.1.1 The Declaration of Conformity-Technical (29 kb) (Attachment "A") signed and sealed in accordance with paragraph 3.2.1.
• 5.1.2 The Declaration of Conformity-Service & Support (29 kb) (Attachment "B") signed in accordance with paragraph 3.2.2.
• 5.1.3 Section- by- section response to each pertinent requirement of the applicable standard referenced in the COMPENDIUM of BASIC INFORMATION and STANDARDS for HOISTS (452 kb).
• 5.1.4 Documents describing or otherwise identifying the product or product family of like design that is HMI Certified, including but not limited to design documents, owner’s manual, parts list, and product catalog.
• 5.1.5 Documents that substantiate the Declaration of Conformity – Technical including but not limited to such things as materials that delineate design inputs, calculations, analyses, evaluations and test reports.
• 5.1.6 The aforesaid documents need not be maintained in the same file or in a single physical space, although they must be readily available in the event of a request by the HMI Managing Executive or his/her designee to review the same, as required elsewhere herein.