SECTION 2 - Basic Conditions

2.1 General operating characteristics of the program include:

2.1.1 Licensee must be a manufacturer of workstation bridge cranes or patented track systems.
2.1.2 MMA membership is NOT required to receive an MMA-Certified License; however, Applicants shall be able to satisfy all of the requirements for MMA membership with the exception that MHIA membership is not required. Download MMA Bylaws (84 kb)
2.1.3 MMA-Certified can only be applied to products that conform to
ANSI MH27.1 (368 kb) or ANSI MH27.2 (243 kb).
2.1.4 A cognizant and qualified Professional Engineer, who is registered in the United States of America and employed or otherwise retained by the Licensee, must verify, sign and seal that the product meets the requirements of the applicable standard(s) and must construct a supporting Technical File as described in SECTION 5 – Technical File Guide.
2.1.5 A listing of active MMA-Certified products and qualified Licensees is available here.
2.1.6 The MMA-Certified mark (63 kb) can only be applied to products that have been certified in accordance with the requirements set forth elsewhere herein.
2.1.7 A product that has been altered (i.e., a significant design change) beyond its Certified Configuration can only carry the MMA-Certified mark after a cognizant Professional Engineer verifies, signs and seals that the altered product meets the requirements of the applicable standard.

MMA